High temperature material for the manufacture of an isothermal die stack

Location

National Manufacturing Institute of Scotland (NMIS)

Description

The National Manufacturing Institute of Scotland (NMIS) is sought to secure a suitably qualified and experienced supplier with the capability and capacity to supply and deliver a high temperature material. The high temperature material is required for the manufacture of an isothermal die stack, capable of operating within an isothermal forging vacuum chamber at a temperature of 1200⁰C and loads of up to 2000 tons. The material is required to take the form of a molybdenum based alloy which can withstand and operate up to 1200⁰C in a vacuum or inert gas atmosphere. Approximate dimensions are in the range of 400mm in diameter and 200mm in height.The University was specifically interested in suppliers who could provide Titanium-Zirconium-Molybdenum (TZM) to conform to the requirements.

Total Quantity or Scope

The National Manufacturing Institute of Scotland (NMIS) sough to secure a suitably qualified and experienced supplier with the capability and capacity to supply and deliver a high temperature material. The high temperature material is required for the manufacture of an isothermal die stack, capable of operating within an isothermal forging vacuum chamber at a temperature of 1200⁰C and loads of up to 2000 tons. - The material is required to take the form of a molybdenum based alloy which can withstand and operate within the temperate range of 1080⁰C and 1200⁰C in a vacuum or inert gas atmosphere. Approximate dimensions are in the range of 400mm in diameter and 200mm in height. - The proposed material is required to have strong thermal and creep resistance characteristics and should also be capable of withstanding extreme thermal and mechanical loads in service. - The Material shall be supplied in the as-wrought and stress relieved condition (not recrystallized). - The final material will require Non-destructive ultrasonic testing. There must be no presence of cracks and surface defects upon delivery to site. - The supplier's solution will include the delivery of the material to the AFRC, based in Inchinnan Scotland.

Award Detail

Renewal Options

The Contracting Authority reserves the right to request additional deliveries by the Successful Tenderer, either intended as partial replacement of supplies or installations or as extensions of existing supplies and installations. The Contracting Authority may at it's sole discretion exercise this option.

Award Criteria

CPV Codes

• 44115220 - Heating materials
• 44190000 - Miscellaneous construction materials

Indicators

• Options are available.

Other Information

** PREVIEW NOTICE, please check Find a Tender for full details. ** (SC Ref:684068)