Design and Fabrication of x3 Replacement Gantry Crane Operator Cabs

Location

London:

Description

2. The Service 2.1 The Contractor shall provide the following service to the Client for the duration of the service period: 2.2 Design of x3 replacement gantry crane operator cabs 2.3 Fabrication of x3 cabs once design approved 2.4 Replacement/installation of x3 cabs once fabricated 2.5 Commissioning of x3 cabs once installed. 3 Specification/Requirements: 3.1 Replacement/installation of x3 cabs once fabricated 3.2 Cabs will be designed to fix to the existing crane structure as a direct replacement. 3.3 Cab Specification:- • Construction of 3 mm steel plate. • Internally reinforced with steel profiles and lined with 0.7 mm galvanized, plastisol-coated steel plate on walls and ceiling. • 250 mm raised floor for cable routing. • Steel plate floor covered with profiled rubber mat. • Walls and ceiling insulated with 45 mm mineral wool. • All windows made of 6 mm green tint toughened safety glass. • Floor window without tint • Incl. document holder and coat hook • Surface treatment - C3H 180 μm: • Entrance door with full window made of 6mm toughened safety glass, green tint • Additional glass in side and rear made of 6mm toughened glass, green-tinted • Terminal cabinet including door and mounting plate, L x W x H = 400x185x1800mm • Light fixture LED 16.8W, 230V, 50/60Hz • Light and socket • Air-con split system 230V, 50/60Hz • Cooling capacity 3,5 kW / 11942 BTU/h • Heating capacity 4,0 kW / 13648 BTU/h • Operating temperature -20°C til +46°C • Filter box consisting of HEPA dust filter, carbon filter, 2Kw heater and fan blower and 4 meter air hose • Operator seat SCS BL Fabric, complete • Mechanical Suspension • Joystick consoles 150x450mm • Padded arm rests • Vinyl head rest • Turntable, with lock • 2 pcs joystick's 4 steps in 4 directions • Push button grab operation • Push button for start and 1 pc. emergency stop • All mechanical mounted only 3.4 The contractor must supply: • Basic documentation • GA drawing • Electrical drawing • Spare parts list • Declaration of conformity • User manual • The documentation will be provided in pdf format 3.5 Scope of Supply: • Site survey • Project management • Design drawings • 3D Model • RAMS • Lift Plans • Manufacture - 3No Operator Cabs as specification • Access equipment - large scissor lift • Lifting equipment • Removal of old cab • Installation of new cab • Wiring integration to crane • Commissioning

CPV Codes

• 45350000 - Mechanical installations

Other Information

** PREVIEW NOTICE, please check Find a Tender for full details. **